if you dont want to mess with your ride height, dont buy any suspension. even a 1inch extended swingarm will put it stinkbug style.
swingarm ? for motart riding
thinking bout five-0 swingarm, but was wondering
is this going to lift the rear and im going to have
to replace my stock shock and lift the front end
cause i feel confy at my present ride hight
is this going to lift the rear and im going to have
to replace my stock shock and lift the front end
cause i feel confy at my present ride hight
1 - 12 of 12 Posts
thanks fiveo, now my next ? is there an arm out
i can use to maybe stiffen the rear end up
ou am i out of luck
i can use to maybe stiffen the rear end up
ou am i out of luck
you have a heavy duty spring right?
if not theres a trick to stiffen and lift the rear end. get a(or 2-3, depending on how tall you want to lift it) 3" washer and set it on the top of the spring, then put the shock back together and reinstall.
ill be starting a tips and trick section in ministothemax.com soon that will show it all in detail.
if not theres a trick to stiffen and lift the rear end. get a(or 2-3, depending on how tall you want to lift it) 3" washer and set it on the top of the spring, then put the shock back together and reinstall.
ill be starting a tips and trick section in ministothemax.com soon that will show it all in detail.
If you get an aftermarket swingarm with a stock shock it wont raise it too much, and for motarding it will be have longer wheelbase so it will be more stable.
for motard you should raise up the whole bike if you have the money to, you will be able to lean further, cuz hte footpegs wont hit the ground
thanx for the info
gonna buy the arm now
when i recieve it i probly ask how to raise the front
thanx again
gonna buy the arm now
when i recieve it i probly ask how to raise the front
thanx again
oh jeez!
dont get in too deep, you might start a avalanche of needed parts.
dont get in too deep, you might start a avalanche of needed parts.
five0addict said:you have a heavy duty spring right?
if not theres a trick to stiffen and lift the rear end. get a(or 2-3, depending on how tall you want to lift it) 3" washer and set it on the top of the spring, then put the shock back together and reinstall.
ill be starting a tips and trick section in ministothemax.com soon that will show it all in detail.
Nice.... Post up when you get it finished. I'm interested in tryin this.
Master-Bates said:thanx for the info
gonna buy the arm now
when i recieve it i probly ask how to raise the front
thanx again
PM me about your front end.
breakinspokes ygm
1 - 12 of 12 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
PlanetMinis Forums
PlanetMinis forum is the internet's largest mini bike community. View thousands of photos, event coverage, tips, tricks and performance mods.
Full Forum Listing
