PlanetMinis Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1,328 Posts
Dasupertech said:
With the KTM 65 triple clamp all I need is a tampered bearing kit and they should bolt up...correct?


Depends...Which Marzocchi forks do you have:

KTM Marzocchi's with KTM 65SX lugs?

Marzocchi's with Kawi KX65 lugs? or

Marzocchi's with Marzocchi lugs?
 

·
Registered
Joined
·
1,328 Posts
I don't know if the Polini triples would work. Maybe? Might have to get adapter spacers made for it; as long as the steering stem is tall enough. (or press in a KLX or KTM stem?)



I just measured up some KTM triples for you:

166mm Forks center to center

bottom triple fork clamp: 48mm

top triple fork clamp: 45mm

steering stem diameter: 20mm

205mm measured from the bottom of the lower bearing to the top of the steering stem/nut



See if these measurements line up with your Polini front end.
 

·
Registered
Joined
·
1,328 Posts
Yeah, it should sit okay.

My Marzocchi's are 734.5mm from the center of the axle to the lip of the top cap.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top