PlanetMinis Forums banner
1 - 12 of 12 Posts

·
Registered
Joined
·
624 Posts
Discussion Starter · #1 ·
I have a SANO bar kit on my klx. Has the 1" risers and 50style bars. I used the brake cable that came with it because the stock one was too short. Well I cant get the longer cable to work the way I really want it to. Both ends are adjusted all the way out. Any ideas?
 

·
Registered
Joined
·
624 Posts
Discussion Starter · #5 ·
The pads should be fine since its an 2007 and I use both brakes together. They looked 75% or better last time I changed wheels. I'll try moving the arm on the hub.
 

·
Registered
Joined
·
221 Posts
Dang you must be like 7 feet tall because I put 50 style bars on my 110 with the stock clamps and they were ridiculously tall for me. I felt like I was riding a chopper.
 

·
Registered
Joined
·
350 Posts
the shoes may look ok but be worn down. I burned a pair of front shoes up in 6 trips to allsports. they are engineered to stop a 60 lb kid.
 

·
Registered
Joined
·
350 Posts
robbieyukon said:
good point, but my lever pulls almost all the way back to the throttle before it grabs.


My bike dose the same thing I had to reinder the arm before I went out last time just to have brakes. got 2 pairs coming hopefully they will get here before sunday
 
1 - 12 of 12 Posts
Top