PlanetMinis Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
I have an 88SE kit and run an inner rotor kit with it. I just put a strocker crank in it and now the damn thing won't start, not even close. I have good spark, good grounding, and the valve timing seems to be spot on but still nothing. Is it possible that it could be a full 180 deg. off. If so how do I fix it and has anybody else had this problem? Thanks
 

·
Registered
Joined
·
7 Posts
Discussion Starter · #3 ·
It is the takagawa crank that the guys at classic said would workwith the SE kit. I have both a 26mm and 22mm and both yeild the same results.The plug is wet and gas smelling but zero sign of detonation
 

·
Registered
Joined
·
7 Posts
Discussion Starter · #5 ·
yeah I'm an idiot, the black box on inner rotor was mounted upsidedown. As soon as I fixed it the little monster came to life. Thanks for for taking your time and being helpful guys, I really appreciate it
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top