PlanetMinis Forums banner
1 - 11 of 11 Posts

· Registered
Joined
·
3,980 Posts
Discussion Starter · #1 ·
1) How much bigger (roomier) are these bikes than the pitster x2's?



2) What aftermarket seats will fit on these?



3) How much hp does that motor have? (146 kit, bvh, inner rotor kit)



Overall, how does the x4 ride? I am seriously thinking about buying one when they come in.
 

· Registered
Joined
·
2,203 Posts
i don't have the sgr edition but the x4r, and i believe they all have the same physical dimensions



1. much

2. klx

3.plenty, i run a 140 with a ported bvh and it runs with built klx bikes no problem. i also own a built 110 with 160 and ported se head. the bike has a little bit bigger feeling to it than my 110
 

· Registered
Joined
·
8,911 Posts
I will Let you know how the SGR Pro 146cc Motor goes in my X4 this weekend as I have the One out of the Vegas X4R Bike that Made Both Pro Main events....:cool:
 

· Registered
Joined
·
8,391 Posts
I have an SGR 146 bike and its is freaking awsome motor power is around 15/16 HP and with a 26mm carb it will be crazy fast the rear end is just like my bbr super pro set up on my 110 and the forks are just as ghood as zoccs this bike is the top of line and is well worth the money have any other ?'s just >PM< me





Seth
 

· Registered
Joined
·
8,911 Posts
SHADE said:
I have an SGR 146 bike and its is freaking awsome motor power is around 15/16 HP and with a 26mm carb it will be crazy fast the rear end is just like my bbr super pro set up on my 110 and the forks are just as ghood as zoccs this bike is the top of line and is well worth the money have any other ?'s just >PM< me





Seth


Im not sure how much HP the SGR 146cc motor makes But this Bike/Motor RIPS Its all kinds of Mental and im only running my Kehlin 24mm on it and the lowend torque is wicked and pulls real hard from low to mid. It wont rev like a +R but feel that it will hang with one!!! I'll be riding with MillbillyFiddie this weekend and he has a +R 150cc Stroker KLX and his motor is just retarded with Power the thing is crazy.
 

· Registered
Joined
·
8,317 Posts
OLDSCHOOL said:
Im not sure how much HP the SGR 146cc motor makes But this Bike/Motor RIPS Its all kinds of Mental and im only running my Kehlin 24mm on it and the lowend torque is wicked and pulls real hard from low to mid. It wont rev like a +R but feel that it will hang with one!!! I'll be riding with MillbillyFiddie this weekend and he has a +R 150cc Stroker KLX and his motor is just retarded with Power the thing is crazy.


oldschool maybe put a irk on it if you want it to rev quiker. pm or email me and i will get you hooked up with one.
 

· Registered
Joined
·
8,911 Posts
Hey J,

The Southwick Pitbike National is deep sand and a full flywheel for the momentum will be the Ticket.....;) I just wish I had a Bigger Carb 26mm or 28mm to run if you get Flying you will stay up on top of the sand and the wheel wont hook and stick you can rail the turns......its awesome.



I watched 3 bikes last year all with IRK over heat it was deffinetly an Ign. problem. I went and ran a Stock Honda Ign with a takegawa Rev box. Man this Motor absolutly RIPS!!! I cant discribe it Better. I'll know a lot more this weekend Millbillyfiddies got his hands on a New Bobcat and we are building a 30' Table to hit.



im going to Service the forks and tweek them a bit with shims It wont take me long to dial it in...:cool:
 

· Registered
Joined
·
8,317 Posts
oldschool,

well you know the track and conditions better then me. I was just trying to help alitte. The drag race shad is talking about I had a stock ignition also.



That is what we have been saying for months LOL the SGR motors rip......
 

· Registered
Joined
·
8,911 Posts
STAGGSgoodwin Racing said:
oldschool,

well you know the track and conditions better then me. I was just trying to help alitte. The drag race shad is talking about I had a stock ignition also.



That is what we have been saying for months LOL the SGR motors rip......


And I Appretiate any assistance Believe me...:cool: there is 2 stops at the Masters of Mini that will be packed wide open Motocross were a IRK would be best.



a New Custom cycle shop bought one of the popular motorcycle dynos, the owner offered millbillyfiddie and me to use it this shop has some Tallent and the guys are tuning genious!!!......unfortunitly the owner just got smoked by a truck bringing a bike for a test ride..(No helmet) hes on Life support...:( so for now the Numbers will stay a Myth but RIPS definetly fits the build...:D
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top