[110rider]

Has anyone installed forks from an SDG Pro Mini on a KLX 110? These are the forks made by marzocchi. If so, what needed to be done to the triple tree to make them fit?

 

[357 Racing]

Well first on all there alot shorter then the 110 zokes.



Secondly I think the axle size is different from the klx110.



And lastly you should just need 35mm triple clamps from a pair of real zokes. IDK

 

[xxfumfxx]

i used ktm triples on my klx. i used my old pro mini forks on there

 

[357 Racing]

i used ktm triples on my klx. i used my old pro mini forks on there

KTM65 clamps will work but you will need the bearing/race lit from pax racing.

 

[Paxracing]

i used ktm triples on my klx. i used my old pro mini forks on there

Any pic of your bike.

 

[xxfumfxx]

Fleck Bearing

that is who we went through to get our stuff, and really cheap. i would try these guys.

 

[110rider]

Well first on all there alot shorter then the 110 zokes.



Secondly I think the axle size is different from the klx110.



And lastly you should just need 35mm triple clamps from a pair of real zokes. IDK

Thanks. Based on the above, I think that I will cross this off of the list of options.

 

[Detroit]

im thinking of doing the same thing. how much shorter are these then reg zokes?