PlanetMinis Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
103 Posts
Discussion Starter · #1 ·
ok when i start my bike it revs our completely.

i recently rebuilt it and it ran fine n now that my buddy jetted my cabr it revs out completely, i kno i messed with the idle screw alot so that might be the problem? turning the screw in highers the idle? correct? so by turning it out, it lowers the idle?



i put a HV oil pump on, and a TB 88 kit w/ race head, i set the vavles n everything is together but now i needa get it tuned, but i cant tune it because it revs out right when i start it...

i moved the needle 2 notchs and put a new main jet.
 

·
Registered
Joined
·
985 Posts
sounds like an electrical probelm check all ur wires to make sure they are in the right spot with washers. Hard to explain but mayby you will know id have to get a pic for you. Or actully it might be ur throttle take ur off the cable to the throttle and see if it starts, ur throttle cable is probably to tight need to losen.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top