[rasta88]

I want to raise my 110 height without getting 60/65 forks and extended shock and swing arm. I am thinking about the dampening rod, but what an expensive small piece for a bike!! I would like to life the bike around 1-2 inches if possible in hopes that helps from ruining my brake pedals. Let me know what you guys have in mind please and thank you.

 

[XLr8r]

Here's a link that shows most of the KLX110 suspension options.

Just close the stoopid pop-ups, the chart is underneath.

Lots of good info.



KLX 110 Suspension Chart. Edited by John Falkenthal

 

[bt260]

use an over the top brake pedal woth a brake snake. My bike has damping rods, emulators and heavy springs in the front and +2 swinger and a slightly longer than stock shock and still drags the shift lever and brake pedal in the corners. I use a Moose steel shift lever and Two Bros Over the Top pedal with a brake snake to minimize the damage.

 

[CTATV]

yeah over the top pedal is the must

 

[Babbott16]

I just installed the ishock m1 a4 and it raises my rear atleast an inch maybe tad more... Now need to get the rods and spring infront to level it out