PlanetMinis Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
189 Posts
Discussion Starter · #1 ·
Im waiting for honda/yamaha shop to open. I need jet kit. Unable to pull carb to match. So im going to buy assortment for stash. OGM yx160 clone motor.



Main Jets PART # kn100604 and then Main jet size



Sizes are: 60-100 and 105-200 in increments of 2.5 (sold in packs of 4)



For Pilot Jets PART # kvm28486 and then pilot size



Sizes are: 15, 17.5, 20, 22.5, 25, 27.5, 30, 35, 40, 45, 50, 55, 60



This is what im try to get for stash

KIEHN MAINS # 85, 95, 100, 105, 110, 115, 120, 125, 130 & 135



MIKUNI PILOTS #25,27,30

Can someone confirm part no.s? and is it true that jets are same a banshee for reference?
 

·
Registered
Joined
·
657 Posts
That's going to be an expensive trip to the dealer. Last time I bought jets from a suzuki dealer close to me they were around $5 ea.

I wouldn't worry too much on the part numbers.

My dealer had all the jets in a box and you just look for the style and size you need.
 

·
Super Moderator
Joined
·
10,387 Posts
Everything you need can be found right HERE

Copy down all the part numbers and ask your local dealer if they can order them directly from SUDCO for you.



The Main (N100.604) and pilot jet (VM28/484) numbers you listed are for the Mikuni carb, but those pilot jets are NOT the ones used on the Banshee carbs. That pilot jet number is M28/1001.
 
1 - 6 of 6 Posts
Top