PlanetMinis Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
183 Posts
Discussion Starter #1
I am in need of a couple things for the pwk28.



1. Brass Cable Slide Lock for slide cap on top.

2. Heavier spring

3. Four-Stroke needle?



Thanks in adv.



:cool:
 

·
Registered
Joined
·
313 Posts
you can use the spring out of your stock carb it works great, the needle you need is the JJH, the part you can order from sudco and needle too.
 

·
Registered
Joined
·
369 Posts
I found it all on Ebay in a kit. It was cheap too. Some of the parts, jets, pins etc didn't fit but that I chalked up to the fact it was a Chinese knock-off kit. But the parts fit on my genuine Keihin or at least the parts that mattered.
 

·
Registered
Joined
·
183 Posts
Discussion Starter #4
alright guys thanks i got the cap nut and a place to get the needle. i dont have a old carb to change out the spring, any ideas? my throttle is hanging up a tad after i let off, pretty sure my slide is staying open due to the spring.
 
1 - 4 of 4 Posts
Top