PlanetMinis Forums banner
1 - 20 of 30 Posts

·
Registered
Joined
·
41 Posts
Discussion Starter · #1 ·
Let's see what creative ideas people have come up with to cover their bikes!!!

Rims/spokes, plastics, seats, bars, anything applys!







Thread rules-



- NO store bought graphic kits! Has to

Be custom!









I wanna see custom colors, spraypaint, random stickers, stencils, etc!!

Some real wacky stuff like pink wheels or a safety orange seat!







GET CREATIVE!!







I've wrapped some of my plastics in wood grain. I'll post up pics soon.
 

·
Registered
Joined
·
273 Posts
Don't know if these count, they were more to be cheap:



Graphics were taken off of one of my big bikes and cut to size and shape (my big bikes got the same graphics put on again so my mini now matches them).



Numbers were cut out of a black sticker sheet to match the shape of the N-Style pre-prints on my big bikes. The outlines on the numberplates are blue electrical tape.



The seat cover was a blue gripper seat cover for a 250F that I got on ebay for $5 and cut to size.



Swingarm and frame are painted black, lower fork legs are powdercoated black.



I custom made the carbon fiber pieces on the ignition and clutch cover, as well as the skidplate.











 

·
Registered
Joined
·
4,725 Posts
I rattle canned my scilencer.



1.contact cleaner or adhesive remover to remove sticker logo

2.rough sand

3.fine sand

4.contact cleaner

5.2 light coats heat silicon spray paint(let dry between 1st-2nd coat)

6.once dry, spray 1-2 coats of dsired color

7.once thats dry, 2 coats of clear protective enamel

8.when everything is hard and dry, you're done, go out and ride.



Sorry, no pics. I'll snap some as soon as I get a hold of a cam.
 
1 - 20 of 30 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top