[H-man]

Im installing my HV oil pump, IIm ready to drill the hole but I cant get to it with my drill because the stud is in the way. I Cant get it off! AARRRGGHH. HOw do I remove the stud, or is there a way around this.

 

[Dano33]

Go to a hardware store (Sears) and get a 12" flexible drill bit extension. They are only a few bucks and will allow you to drill the hole out with the stud in place.



Dano

 

[50man]

Or remove the stud. Just tighten two nuts together on the the stud then unscrew the stud out.

 

[H-man]

I tried that last night (the 2 nuts). Is it counterclockwise to loosen? Ill try it again.

 

[mxracer728]

yes, counter-clockwise to loosen

 

[gomerpile2525]

lol......righty tighty lefty loosy

 

[five0addict]

i ended up rigging a drill bit on a screwdriver, it worked good b/c i could make extra sure no shavings got inside

 

[H-man]

success!