PlanetMinis Forums banner
21 - 40 of 57 Posts

·
Registered
Joined
·
20 Posts
ok, the top cap unscrews but both sides will not slide up and out of the fork tubes, am i doing something wrong. I want to see about replacing the orings for the top adjusters that seems to be leaking... anyone???
 

·
Registered
Joined
·
214 Posts
Discussion Starter · #22 ·
RLucky82 said:
koodos! :applause:
Thanks ~ I plan to update the pdf with some additional information for anyone that is New to Pit bikes. Important engine information and the problems/challenges that come with the territory.
 

·
Registered
Joined
·
630 Posts
lmtless2 said:
cam, after you break it in with 10w 40 oil what should u run on a regular basis?


doopsx3 said:
i use golden spectro in all my 4 strokes...from my minis up to my yzfr1...never an issue


10w40 does really good on a regular basis .that's what we run in all our bikes
 

·
Registered
Joined
·
3,296 Posts
I'll sticky it for you. If someone higher up the food chain than I decides it shouldn't be stickied, then it will be unstickied...lol.
 

·
Registered
Joined
·
214 Posts
Discussion Starter · #30 ·
Lmtless2 said:
cam, after you break it in with 10w 40 oil what should u run on a regular basis?


I use Rotella 15w-40 in every off-road and on-road vehicle I have. Bikes, my wifes ATV and even my Van. I've been using Rotella for many years and have never had one single problem. It's less expensive than most Motorcycle brands.
 

·
Registered
Joined
·
394 Posts
i recently installed a tb bbk 30mm carb and race head on my 07 pitster x3r and the piston hit the exhaust valve and it also blew the head gasket ??? helP!
 

·
Registered
Joined
·
3 Posts
Great info on the Newbies, looking for our first pit bike. I have a 5 yr old son who rides a CRF 50 I ride a CRF 450 but its so hard to ride with on the 450 so I started looking at the new KLX 110L which runs about 2700.00 OTD, then started looking at some of the Chinese pit bikes which look very cool but are they any good? Can anyone give me their thoughts on brands or is just to stick with a factory brand/



Thanks for any help!
 

·
Registered
Joined
·
7 Posts
Re: "Must know" Chinese Pit bike info

camrider said:
I put this together last night to help potential New pit bikers gather as much information as possible in one place about purchasing a bike and maintaining it. The PDF file contains information pertaining to the Purchase of a New pit bike and contains a lot of compiled information for first time buyers including, Buying online, Pre-ride preparations, Engine break-in procedure, Fork servicing, and maintenance. It is a savable file and can be printed.



I will add to this file as I find information that I believe to be helpful to any and all. I can and will also add links to Manufactures and dealers websites with their permission. You guys(dealers) just let me know if that works for you - or not.



This compilation is not intended to disrespect or degrade any dealer(s), manufacturers, or any forum members. Most of the information was compiled from various TT and PM members. I take little credit other than typing it up and producing the PDF file.



I hope this answers many questions that inquiring minds want to know......



Click here to view, download, and save PDF file



-
I was looknig for some help with my thumpstar pitbike. I need a spoke kit for my rear 12in rim and no one around my place has any idea where to go to or even where to start to look for some if you could help me or point me in the right direcion that would be great
 
21 - 40 of 57 Posts
Top