PlanetMinis Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
I am wondering about the quality of the Pirahna wheels for a CRF 50. I found an old thread from 6+ years ago, but I am interested to see if anyone could give me current information. Back then, it seems they were okay, just need to keep a close eye on the spokes. Any help would be appreciated.
 

·
Registered
Joined
·
37 Posts
I had some and didn't tighten the spokes often, one day felt like I had a flat and half of the spokes were loose. wheel bent
 

·
Registered
Joined
·
660 Posts
Anyone got any info?
We bought a 10" rear and happy, quality is very good.

Recommendation - after installation

  • 2 rides up and down street - checking spokes after each ride for spoke looseness
  • 2 rides on track - 1st few laps moderate speed then check for spoke looseness. 2nd ride go at a faster pace couple laps, then check for looseness.
  • Now - should be good to go racing.
Good luck!
 
1 - 5 of 5 Posts
Top