PlanetMinis Forums banner
1 - 6 of 24 Posts

· Registered
Joined
·
4,543 Posts
oh heres my pov on these setups.

i hear the sik50s is harder, but i dont think that is a bad thing. ive ridden a five0(billetware, similar to sano) and the 250lb spring on the shock was too soft and we needed a 350lb to even it out. if the sik50 is stiffer does that save the spring swap?
 

· Registered
Joined
·
4,543 Posts
im talking about tightening the preload, that just wont be very good. if you tighten the spring it wont make it stiffer, just have no feeling of progression.

extended swingarms help to even out the ride, they also increse the wheelbase for stability, bla bla bla...
 

· Registered
Joined
·
4,543 Posts
i think you just dont like the stiff style. its just 2 different ways to setup, nbd.

i have to have mine as stiff as possible so i dont bottom it out all the time. from what i can tell i will bottom out no matter the preload ajustment, seems like i need a stiffer spring....

but this has gotten off topic too much.
 
1 - 6 of 24 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top