PlanetMinis Forums banner

Need some advice

1022 Views 2 Replies 3 Participants Last post by  JAZ-SFT
276500

Hi all! This is my 1983 atc70 which I scored for 100 bucks I changed it to CDI electrical and got a new carby for it and got it running and she ran fine idled started and was amazing through after riding it one day the next she wouldn't start so I used some start ya bastard and she fired but wouldn't idle and and just lost power and ran like a pig so I cleaned the carb and got a new spark plug through I had to numb start it bc I broke the pull cord and it made no difference she still runs like a bag of rats and has lost even more power. Can anyone please explain what's going on would be greatly appreciated like is it time for a rebuild
See less See more
  • Like
Reactions: 1
1 - 1 of 3 Posts
Wicked bike mate welcome to planetminis
You’ve come to the best place for advice
As davmo said sound like a fuel issue
Deffs start by cleaning the tank out and your carby maybe pull the jets out and give them a blow out
Even clean the air filter and fuel lines and go from there work your way thru each step that way you can eliminate possible issues
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top