PlanetMinis Forums banner
1 - 11 of 11 Posts

·
Registered
Joined
·
859 Posts
Discussion Starter · #1 ·
ok my friend ordered the sp5 for from bbr and me and him put it on and slid the fork tubes up and it still looked really chopperred he has a stock frame and swingarm
 

·
Registered
Joined
·
755 Posts
you need a rear aftermarket shock and a swingarm, with the angle of the stock swingarm you are gonna stretch your frame, the fors won't compress properly at the stock swingarm angle. theres to much spreading at the head
 

·
Registered
Joined
·
684 Posts
get a iShock and a aluminum swingarm



Sik50s carries aluminum swingarms, that will fit a iShock upside down so you wont have to cut out your seatpan, unlike the other brand's alluminum swingarms. Also, Sik50s is a authorized iShock dealer, and has them all instock.



www.sik50s.com

(805) 278-7200

-paid advertiser-
 

·
Registered
Joined
·
1,557 Posts
five0addict said:
who wants a ishok anyway? you guys should stick w/ works


Well there must be a demand for them if Sic50s is starting to sell them. :p
 

·
Registered
Joined
·
178 Posts
i have an ishock without res i would be wiling to sell... [email protected] . it's brand new - been riden for like 15 minutes.
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top