PlanetMinis Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
106 Posts
Discussion Starter · #1 ·
So i just got this bike off a guy for extremely cheap, and it needed some work, but like i said it was reeeallllly cheap. i'm having a slight problem with the motor, when i put it into neutral, and then kick it over, sometimes it goes into gear, i took the flywheel cover off and there's a tiny bit of rust, and when i took the oil filler cover off the oil was like up to the top, any ideas?
 

·
Registered
Joined
·
3,659 Posts
jzalabowski said:
So i just got this bike off a guy for extremely cheap, and it needed some work, but like i said it was reeeallllly cheap. i'm having a slight problem with the motor, when i put it into neutral, and then kick it over, sometimes it goes into gear, i took the flywheel cover off and there's a tiny bit of rust, and when i took the oil filler cover off the oil was like up to the top, any ideas?






You have 2 different issues my friend.



Your oil level was prolly a result of a stuck float valve and filled the engine with a gas oil mix.



Your shift/starting issue is prolly a rounded out shift star or weak detent spring.
 
1 - 3 of 3 Posts
Top