PlanetMinis Forums banner
1 - 11 of 11 Posts

·
Registered
Joined
·
237 Posts
Discussion Starter · #1 ·
My lifan motor (only 4 rides on it) seems to vibrate quite a lot. The engine also has a slight clicking sound.

I have checked the clearances and all the bolts on the bike.

Should i worry or leave it???

it is a lifan 1st - neutral - 2nd - 3rd - 4th

Thanks
 

·
Registered
Joined
·
10,012 Posts
yeah, even with awesomely adjusted valves, they will always click. your probably hearing a lot of it out the air filter.



as for the shaking, the motor is bolted directly to the frame on these bikes. there are no engine mounts like in a car, where they damp the vibrations.



have you had other knockoffs that dont shake like this??
 

·
Banned
Joined
·
720 Posts
i am going to say its the oil slinger, my gpx was doing it, and it was just a loose oil slinger nut. i tightened it up, and now im all set. definatley check it out, (you need to take the oil slinger plate off to see if its loose), the plate has 4 philips head screws and can be kinda tricky to get loose with out stripping it, id use a impact screwdriver, the kind you hit with a hammer to break the screw free/loose.

-dave
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top