Here are some pics of my 79' and 84' Z50R's. Both have 88cc motors, exhausts, etc. etc.. Just finished them both up this weekend. I'm almost done with my 92' Z, waiting on the bars. Will post pics when that is finished..
4 weeks since the fracture, probably be another at least 2 in the cast. Dont tell my wife but I'll be back...... I was having a blast up till that point. Good times up at 106. This was a freak thing....(I hope) !
I'm looking for a wiring diagram for a 1980 ct70. I've checked just all the sources and diagrams on the web that i could find, but i cant seem to find one that matches up.
The bike is all original and in fantastic condition except for a power issue. The current wiring harness appears to be...
I'm running a Lifan 125 with a Mikuni 22 mm carb, and I'm maxing out around 52 mph with stock gearing. Any tips on getting more speed out of it? I'm thinking of going up a tooth on the front sprocket. What is the ideal gearing to get the most out of it?
Still working on tuning out a bog off...
Stupid Z50R tire inflation move
I had installed the Carlsile X-trac tire on the rear of my Z50R 1980 bike and enjoyed the traction and it was rather softly inflated... I do not know the pressure.
Then later I got the keen idea that it might ride better on pavement if I inflated a little bit...
Hey all,
New to planet minis so I apologize if this post is in the incorrect spot! Just joined tonight 8/24/19, but have been following this page for a super long time haha! First off, thanks for sharing all of the cool z50 photos! There are some badass z50 resto/mods on here and I'm extremely...
I hope I'm not beating the dead horse hear but can someone help me source one of these adapters? I have a 1975 CT70 3 speed K4 engine with no stator/flywheel. I was thinking just going to a 12v stator and flywheel setup would be easiest?
berade01 · updated 
REstes1989 · updated 
