[MotoX-67]

Can a rear swingarm from a kx60 fit on a klx 110?



Will i need the top shock mount relocator bracket?



What length shock should i use?



Does the stock klx wheel assembly fit the kx swingarm?



Any help is appreciated, thx

 

[redirt78]

swingarm direct bolt on for the klx frame-doubt it



relocate the shock mount-probably



rear wheel direct bolt on-yes, with the right spacing. you can use kx60 wheels on a stock 110 so i'm sure the opposite will work, the kx60 wheels are better though



if you look around this site you will see that just about anything is possible and with some cutting/welding you might be able to make all of it work, don't know if it's worth the trouble



i have never seen anyone use the kx60 swingarm setup, lots of people have done the kx65 conversion and plenty of people use kx65 brake's on their aftermarket swingers with siktendencies adapter kit



if you want to see a good one about the kx65 swingarm conversion on the klx search art5's threads

 

[redirt78]

http://planetminis.com/f15/klx-65-110-85-a-145381.html



http://planetminis.com/f15/klx-65-85-110-linkage-bike-146059.html



http://planetminis.com/f15/klx-linkage-suspended-bike-getting-closer-147071.html



http://planetminis.com/f15/few-more-changes-kx-klx65-148207.html



http://planetminis.com/f15/klx-linkage-110-moving-ahead-further-141385.html

 

[CTATV]

My buddy tried a KX65 rear setup and was not happy with the performance of it...

 

[redirt78]

My buddy tried a KX65 rear setup and was not happy with the performance of it...

its probably difficult to get the linkage/shock setup right, i think the stock kx65 shock needs work and you need a stiffer spring too.

 

[CTATV]

its probably difficult to get the linkage/shock setup right, i think the stock kx65 shock needs work and you need a stiffer spring too.

yeah good point. he's a good welder too so he would have done a good job fabricating