PlanetMinis Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
726 Posts
Discussion Starter · #1 ·
I have a set of KTM 65 forks that I need to change the springs in. They are currently stock and I have the .50 ones that I am tryin to put in that I bought from pax. Is all I need to do is unbolt the allen head bolt out of the bottom of the forks then unscrew the top part of the forks then pull the old springs out and put the new ones in. I am just tryin to make sure that nothin like pops out and then I can find out where it goes back in ha ha. And I don't have new fork oil to put in yet so I need to save whats in there so I can ride for the next couple of days.



Thanks,

Derek
 

·
Registered
Joined
·
420 Posts
I did a 65 front end.. not the Zokes. but i rebuilt them and took my 110 forks apart..



I ended up putting 110 Twobros HD springs in them and they work great. MUCH STIFFER and good for trails, not so muhc for the track though..



also i ran some 15 WT oil..
 
1 - 4 of 4 Posts
Top