PlanetMinis Forums banner

Klx110l fork "caps"

2K views 4 replies 4 participants last post by  tbrick563 
#1 ·
I'm putting in stiffer fork springs on my klx110l. The fork caps or covers I'm a little stuck on getting them off to pull the springs out.. It's not a blot to unscrew .. Has anyone done this that can help?
 
#2 ·
clamp the forks in a vice and take a Philips screw driver or something similar and push down in tha little indention in the cap. push it down compressing the spring and take needle nose pliers and pull out the c clip inside the fork tube. be careful cuz that cap will pop off like a champagne bottle
 
#5 ·
i left mine in the clamps and rigged a 3 jaw puller to push the cap down so i could get the little clip out
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top