PlanetMinis Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
260 Posts
Discussion Starter · #1 ·
so I got my klx110 carb rebuild kit and I was able to remove the awkward looking old air fuel screw out put the new air fuel screw in was wondering what the stock settings are for the air fuel screw ..also running #38 #80 stock jets with a stock air box and pro circuit pipe.. I'm having problems getting the thing to idle correctly
 

·
Administrator
Joined
·
10,723 Posts
Try 1.5 turns OUT from seated, as a baseline to work from and return to. Make your adjustments in 1/4-turn increments when tuning, so you know how far from the baseline setting you are.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top