PlanetMinis Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hello alll, looking for some input about my klx 110. Currently is has a143 tb kit on it and im looking to upgrade from the stock head. Are there any different heads that will bolt straight on from other motors like the zongshen or the yx 150 or 160s?

Or is the tb v2 race head my only option?
 

· Registered
Joined
·
141 Posts
I have a 2003 DR-z 110 with the YX160 cylinder head and it bolts right up. The only issue is the YX150/160 head runs a KLX110 bolt pattern with a Honda style intake and exhaust system. You will need to use a Honda style intake with a VM 26mm carb. These cylinder heads are the same as a V1 race head with a 27.5mm intake and a 23mm exhaust. I hope this information helps. Good luck with your build.
PS, Use the Hi comp piston too.
Hello alll, looking for some input about my klx 110. Currently is has a143 tb kit on it and im looking to upgrade from the stock head. Are there any different heads that will bolt straight on from other motors like the zongshen or the yx 150 or 160s?

Or is the tb v2 race head my only option?
 
1 - 2 of 2 Posts
Top