PlanetMinis Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
389 Posts
Discussion Starter · #1 ·
I bought on EbaY an front KX 65 Galiper + the master cylinder lever...and now i will try to fit them on my bike ...

does anyone know if this bracket My linkcan fit on my Marzocchi Fork (Pitster Pro x4 ) and if the convertion fit what size of front disc brake should i Use .... with the stock brake kit the disc is 190mm



Thank you for the info



I
 

· Registered
Joined
·
5,278 Posts
the KX65 front disc brake adapter uses a 200mm front rotor but you should be able to get away with using the 190 but you may want to check with Pitster to see if they offer the 200mm rotor for your wheel.



NOTE: The Pitster adapter bracket kit for the front brake that we have made is for the CR85 front caliper and uses their 220mm wave rotor.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top