PlanetMinis Forums banner
1 - 8 of 8 Posts

·
Registered
Joined
·
8,362 Posts
I run Less than a Quart of oil... because these motor create a lot of pressure and will actually push out the oil through the crank case Vent and head breather.



I run it just touching the dipstick when "hot" with an Oil cooler
 

·
Registered
Joined
·
8,362 Posts
thejunkman said:
I run 750cc with an oil cooler on my 140, this puts it about 1/2 way on the dip when hot, any more and I get some smoking and puking out the overflow.


I run between 550 and 600cc with a oil cooler for a few years now with no issues



at the present time im running a SGR 146cc Pro "Factory Built" Motor and believe me it gets Hammered and it RIPS
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top