PlanetMinis Forums banner
1 - 12 of 12 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 · (Edited)
Greetings from Finland!

I'm new at these forum things and I don't know how to do proper post and my English language isn't the best so don't mind if this post is little bit bad.... I thought that I would like to post my bike build here. So anyways it's 1989 year's Z50J with my own vision, maybe most of the people doesn't like it. So everything started 2021 summer when I build this bike first time. At that time it was what it was because i built it quickly so i can ride it at summer. Most of the parts were wrong color and the bike was not looking good, but it did it's job.

Bike had 50cc at first, but then I swapped engine to 72cc Lifan at fall of 2021

I had to rebuild the 50cc engine, because it looked like this....
I painted it and check everything from "downstairs". I painted the cylinder and hone the scratch. I had to buy new cylinder head, because the old one was so bad condition that it wouldn't work anymore.

After rebuilding the engine I started to build rest of the bike. After wards I changed the bar.


Tire Wheel Vehicle Motor vehicle Automotive tire
Tire Wheel Vehicle Motor vehicle Automotive tire

Motor vehicle Gas Machine Auto part Automotive wheel system
Motor vehicle Automotive design Engineering Gas Machine

Tire Wheel Automotive tire Vehicle Automotive lighting
Wheel Tire Automotive tire Vehicle Motor vehicle


Tire Fuel tank Wheel Motorcycle Plant
Tire Wheel Fuel tank Vehicle Automotive lighting

Tire Fuel tank Wheel Automotive fuel system Automotive lighting
Tire Wheel Automotive lighting Automotive tire Fuel tank
 

·
Registered
Joined
·
9 Posts
Discussion Starter · #2 · (Edited)
Story contiunes...

Now we get to February 2022. I have just started to dismantle the bike it was dirty and didn't look good at this time I had the 72cc already.
As you can see from the pictures the paint was at bad condition, it had been from the start, but now it's time for repaint and rebuild.

I bought new rear shocks and rear-end. The new rear-end was +5 cm longer than the original and the rear shocks were 300mm long.
Unfortunately I don't have picture from rear-end.
I painted gas tank, rim plates, the centre, rear-end, front-fork and bought new stickers. Also did maintenance for the front shocks
Motor vehicle Helmet Motorcycle helmet Automotive tire Automotive design
Automotive fuel system Automotive lighting Fuel tank Motorcycle helmet Helmet
Automotive lighting Helmet Fender Bumper Automotive exterior
Tire Wheel Automotive tire Automotive lighting Motor vehicle
 

·
Registered
Joined
·
9 Posts
Discussion Starter · #4 ·
The end...

Now starts the installing, best moment of the projects!
I don't really know what to say about the installing, because it went well so here some more pictures.
Tire Wheel Vehicle Bicycle tire Automotive lighting
Tire Wheel Automotive lighting Automotive tire Vehicle
Tire Wheel Vehicle Automotive lighting Automotive tire


That about it bike is almost ready now, only need new chains and install chair.
Thanks if you read the whole thing and please ask if you have something to ask I will answer if I'm able and here is the final product


Tire Wheel Fuel tank Vehicle Automotive lighting
Tire Wheel Land vehicle Vehicle Motor vehicle
 
1 - 12 of 12 Posts
Top