PlanetMinis Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
74 Posts
Discussion Starter · #1 ·
Looking for help or advice. Fork oil is leaking out of the adjustment screw on top. I'm not looking to tear into it until I know what I'm getting into. Does this require changing fork seals? Thanks for any help.
 

·
Registered
Joined
·
74 Posts
Discussion Starter · #3 ·
Thanks, Warpig. I was wondering if it happened to be a small o-ring or something rather than the fork seals. However, mine only have one screw on top of them, in the center, for the adjustments. Anyone know if I can pull this out and replace an o-ring or something?
 

·
Registered
Joined
·
74 Posts
Discussion Starter · #7 ·
Re: GPX fork oil leak help!!!

I tore the top cap off the fork leg and removed the cap with the dampening rod. I can't seem to access the o-ring that seals the adjustment screw. Can anyone help me figure out how to remove the sliver piece from the black top cap. It seems like it's threaded in, but it won't turn. I don't want to break anything by torquing on it too much. HELP!



 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top