PlanetMinis Forums banner
1 - 17 of 17 Posts

· Registered
Joined
·
3,079 Posts
ya, whatever head you get you will need to get a domed piston for it. The trail bikes head is a good head and is pretty cheap and there is also someone on ebay selling E22 heads for cheap which are pretty good heads also
 

· Registered
Joined
·
7,005 Posts
i have a E-22 head with a 52mm 88cc piston for the head I'll sell both for $160.00 shipped that includes the rings wrist pin clips and head gasket and the complete E-22 head with cam rockers springs and all covers for the head and its ready to install fully assembled
 

· Registered
Joined
·
3,869 Posts
Well, being that its the 81 there isnt much you can do, as the aftermarket heads are made for 52mm pistons and if you go with a diff head you have to have a new piston to fit the head. What you could do is have you stock head ported and that will help out alot.
 
1 - 17 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top