PlanetMinis Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1,088 Posts
Discussion Starter #1
Hey guys, I need some help installing my Red Baron G2 Forks. I'm not having any problems with the actual forks or setting up the brakes, I got all that down. The thing I'm having problems with is that I can't for the life of me get the stem in there right. With all the stuff on the stem tightened up as much as I can the front end still wants to rock back and foward on the frame, and where the bottom clamp and the neck of the frame should be flush there is a gap big enough to stick a couple of coins in. It's really bugging me cuz I took the whole thing apart and put it back together 5 times now and it's still doing the same thing!



Somebody please help me out with this.



Thanks.
 

·
Registered
Joined
·
761 Posts
bearings not sitting right..

if top of bottom clamp isn't sitting tight with bottom of neck chances are the bearing isn't seated all the way on the stem..



did kit come with new tapered bearings? top and bottom bearings are also different so if you mix them up they won't seat properly
 
1 - 2 of 2 Posts
Top