PlanetMinis Forums banner
1 - 5 of 5 Posts

· Registered
Joined
·
248 Posts
Discussion Starter · #1 ·
i have a 07 klx 110 and it is basicaly stock except for free mods( air box snorkle out, drilled out pipe) also changed jets to a 40 and a 85. sometimes when i go to crank it the kickstarter is locked up and the over flow tube on the carbrueter is running fuel out none stop. when it finally stops running out it will crank but my dad seems to think that the float is sticking but we dont know.anybody else have this probluem? please help me out with a solution to this probluem thanks in advance!
 

· Registered
Joined
·
644 Posts
mx571 said:
i have a 07 klx 110 and it is basicaly stock except for free mods( air box snorkle out, drilled out pipe) also changed jets to a 40 and a 85. sometimes when i go to crank it the kickstarter is locked up and the over flow tube on the carbrueter is running fuel out none stop. when it finally stops running out it will crank but my dad seems to think that the float is sticking but we dont know.anybody else have this probluem? please help me out with a solution to this probluem thanks in advance!


Im pretty sure i had the exact same problem as you. The float was stuck and the gas poored out of the over flow and also EVERYWHERE else. Drail the oil and if it looks milky you know gas got in there too.
 

· Registered
Joined
·
248 Posts
Discussion Starter · #5 ·
the kickstarter locks up b/c the cylinder is fuel of raw gas and when you take out the spark plug and kick it over gas shoots out the hole about 5 feet and i kick it till it stops and then sometimes it will crank. some people say that the stock carbrueter just sucks i am starting to agree.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top