[318tryke]

Okay so I have been working on a build I started a few months ago (had some things come up and got set aside), but anyhoo, the motor I put in is a GDRYUAS(I believe is the name) 125cc kick start, 4spd with the wiring harness for a headlight. I'm not super knowledgeable about wiring, I was wondering if anyone would have any suggestions for tricks or ways to wire in a kill switch/light switch (have oem honda switch setup off of an atc 110 same color wires as engine). This is my first build and I am aiming to have the machine running for summer.

 

[tmas]

Welcome to Planet Minis. Take a pic of the wires coming from your engine. If you are using a kicker to start it are you sure the kicker will clear the back fender?

engine wiring
tmas

 

[tmas]

Have a look at THIS LINK to help you with the wiring.,
tmas

 

[318tryke]

Okay so more of an explanation of what I am looking at (pics later) a 5 wire bundle black green blue/white stripe solid white and yellow and a 5 pin connection with a 5 pin black box it plugs into. But I will definitely study those links and find out what the best course is.

 

[318tryke]

Welcome to Planet Minis. Take a pic of the wires coming from your engine. If you are using a kicker to start it are you sure the kicker will clear the back fender?

engine wiring
tmas

I'll have to trim a little bit off to account for the room I'll need to move the kicker.

 

[318tryke]