PlanetMinis Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
154 Posts
Discussion Starter #1
I cant get this thing jetted correctly its a 140cc gpx with a 26mm molkt i am very close to sea level less then 500 feet. i have a 100 main the stock pilot and the needle clip is second from the top. it seems to pull really hard but if i give it 100% throttle from idle it sputters then finally kicks in and runs hard and help?
 

·
Vendor
Joined
·
10,562 Posts
scpbmxer01 said:
it seems to pull really hard but if i give it 100% throttle from idle it sputters then finally kicks in and runs hard and help?


Quick Tips For Small 4-Strokes

* If it boggs or dies right off from an idle when you turn the throttle, your pilot is too lean.



jetting guide link

TBolt USA, LLC
 

·
Registered
Joined
·
154 Posts
Discussion Starter #4
1-1/2 turns out. i tried all the supplied combos with the pilots and it still will do the same thing.
 
1 - 4 of 4 Posts
Top