PlanetMinis Forums banner

can we change gear pattern to all 4 up

3083 Views 6 Replies 4 Participants Last post by  lkhangee
hi
i have ducar dj154fmi it has 3 down 1 up gear pattern.
is it possible to convert it to all up ?
do we need to change all transmission gears or just few ? or is there some gear shifter mechanism that needs to be just swapped ?
regards
1 - 7 of 7 Posts
You would need to a different shift drum
You would need to a different shift drum
this is the picture if the drum shift side. Do I also need to replace other things?

Sent from my Nexus 5 using Tapatalk
See less See more
I think your biggest problem is finding a shift drum that will work with your transmission. Dratv sells drums that may work.
tmas

SHIFT_PATTERN CONVERSION_KIT FOR_HONDA_OR CLONE_4SPEED TRANNY'S temp
To add to what tmas has said, you will have to split the engine cases to install the new shift drum.
To add to what tmas has said, you will have to split the engine cases to install the new shift drum.
Engine is already split apart..

Sent from my Nexus 5 using Tapatalk
2
To add to what tmas has said, you will have to split the engine cases to install the new shift drum.
I split the cases and replaced the drum of same dimensions from a other bike.

however the place holding detent arm is different. As is shown in both the cases

The image which shows the difference in crankcase of both types of gear drums. Crankcase with bigger ball bearing for secondary transmission shaft is from dj154 124cc 1down 3up and the one with roller ball bearing is from a 90cc engine.


Sent from my Nexus 5 using Tapatalk
See less See more
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top