PlanetMinis Forums banner
1 - 6 of 6 Posts
G

·
should be the same as the back rim with longer spokes. someone said something about the end of the spoke going one more hole down. im sure someone will clear me up.
 

·
Registered
Joined
·
102 Posts
no its not the same as the rear, if you do it the same as the rear you will end up with to much spoke coming through the nipple.......the front should be a double x pattern....put 1 spoke in and skip two spots.....the spokes are also different.....some are bent more than the others.......the lesser bent are made to go from the outside of the hub in, and the spokes with more of a bend will come from the inside of the hub out.......if this doesnt make sense take a look at a bmx wheel it should be the same way......call sano if all else fails.....
 

·
Registered
Joined
·
438 Posts
its a cross two set up.. unlike the stock set up... it is stronger... if you want the ultimate set up like what was on my race bike.....



Custom made spokes to make a cross 3 set up on both wheels... woohoo!!! bullet proof
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top