PlanetMinis Forums banner

best performance upgrades?

653 Views 13 Replies 6 Participants Last post by  JOHN NIEMEYER
ok so i dont want to go with a big bore kit just yet. whats the best performance mod? cam, pipe etc?
1 - 2 of 14 Posts
Put longer bolts in the peg mount the get a 38 tooth rear sprocket ,it won't hurt your topend but it will give you some bang out of the corner ,then take the pipe off and grind out the washer in the head pipe or drill it out with a big drill bit its faster. The get the pod filter 85 main and the bigger piolet jet I foget witch one put a small washer on the needle or buy the 2bros one , drain the stock oil out of your forks and put 15wt in pull the spring out and compress the fork then fill it to 90mm from the top .

If you do all that it will help a lot and won't cost you an arm and a leg should be about $50

And you will notice a big incress in power and fun

Rear shock

Fork springs

1 - 2 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.