[jdmp]

Anyone have any issues with the shock bolt on this setup backing out? I have this setup on my 50 and 110 and they both back out constantly. Today it actually came all the way out and I did a few laps with no shock bolt!!! Just wondering if anyone has had this happen or has experienced the same issue.

 

[jthenderson669]

i had the superpro on my old 110, and never had that happen at all. have you tried loctite?

 

[jdmp]

yes ive tried loctite

 

[sutton]

Pat, Is it possible to drill a hole threw the head and lock wire it. That will solve your problem.

 

[jdmp]

dont really know how that works???

 

[rford426]

ok like on the back axle nut you can put a cotter pin through it to keep it from moving loose.....just drill a small holl then stick a cotter pin through

 

[jdmp]

dont really know how i would fit that in there but oh well. I'll just keep an eye on it

 

[bucky919]

you could put a lock washer, lock nut, lock wire it, locktite, and mushroom the end of the bolt that should keep it on

 

[A25MX]

ok like on the back axle nut you can put a cotter pin through it to keep it from moving loose.....just drill a small holl then stick a cotter pin through

Yea but with the super pro you have to put the bolt into the little hole and wouldn't have room to put a cotter pin after the screw the bolt in.

 

[hartman]

Use a different bolt and nut.

 

[squidwell]

I'd call BBR see what they have to say

 

[A25MX]

Use a different bolt and nut.

There is no nut

 

[jdmp]

Yea but with the super pro you have to put the bolt into the little hole and wouldn't have room to put a cotter pin after the screw the bolt in.

exactly....Im gonna try and just fit a bolt on the end its just the hole is soo deep its hard to get it in there

 

[Kurlon]

Contact BBR. If they are busting loose even with loctite, something's amis.

 

[Josephine]

Don't ghetto rig it until after you've called BBR.