PlanetMinis Forums banner
1 - 4 of 4 Posts

· Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
Anyone have experience with the Tbolt 88 big bore kit? Is there a better one out there? I'm on a budget (wife says so) and I wanted to know if upgrading the oil pump was necessary when doing the bore kit?
Anything else that is necessary Also?
 

· Registered
2 ATC 70s, US90, 2 CT70 bikes, Z50r, XR70, ATC 350X
Joined
·
276 Posts
They are both right, but to be honest you will be looking for more power with just an 88cc kit. The tiny bit more displacement does help a little but most gains are from higher compression and a Race head. But at that cost I would just get a cheap 125cc kit and be done. Way more power and now you have two motors. For more than you need power the Pirahna 140cc will likely scare you at first and is quite inexpensive also.
 
  • Like
Reactions: John jr and Quinc
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top