PlanetMinis Forums banner
1 - 20 of 21 Posts

·
Registered
Joined
·
1,548 Posts
Discussion Starter · #1 ·
i am looking into getting a 52 mm crank to put into my 50 but i wanted to do some research first. so i went online looking for onee and all i could find is the fast 50's one. i was wondering if anyone knew of any other companys that made one? or mabe a 54mm thanx :D
 

·
Registered
Joined
·
1,548 Posts
Discussion Starter · #3 ·
if i get that 54 mm what cc will it make my bike and will i need a heavy duty clutch and oil cooler and thats it or will i need more stuff. if i need more stuff like what?



thanx for the help :idea:
 

·
Registered
Joined
·
9,515 Posts
Remember, you have to purchase the correct piston with the stroker crank.



I would run the Kitiaco 51mm stroker crank, with Kitaco stroker piston and a 24-26mm carb which will bring your bike over 10HP at 108cc's.



Crank + Piston over $400



If you are set on a 110, get the Dratv.com 52mm stroker crank and their matching piston



Crank+ Piston under $300



Your choice.
 

·
Registered
Joined
·
2,902 Posts
KAOS said:
[quote name='mxracer728']he is most likely goin with Dr atv crank and piston, he just needs to call them and see what s up with the cranks
52mm are pretty much history for a good while till they get a new manufacturer from what I heard[/quote]i read that, I'm just telling you what he said
 
1 - 20 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top