[efiles123]

When I turn to motor off right after coming to a stop something in the motor keeps rolling/turning over for a couple seconds. It has been doing this for a long time. At first I thought it was possibly due to low compression but I just replaced the piston and cylinder with oem parts and had new valves installed as well. The engine runs great now. Idles and has plenty of power. Anyone had this problem?

 

[chubbs]

In most cases, its the one way bearing.

 

[efiles123]

In most cases, its the one way bearing.

About 5 or so years ago I replaced the one way bearing inside the clutch I think. The bearing was worn to the point where I could barely get the motor to turn over when trying to kickstart. Is this the same bearing you're talking about?

 

[chubbs]

Yes, In most instances the "whirring" after the bike shuts off is that same bearing in my experience.

 

[L.Holman]

Sorry for my ignorance, I just want to know if someone can post a picture of this one-way clutch bearing? I know the 2010 and up models have a one-way bearing for the starter, but I've never heard of one for the clutch. Thank you.

 

[efiles123]

Sorry for my ignorance, I just want to know if someone can post a picture of this one-way clutch bearing? I know the 2010 and up models have a one-way bearing for the starter, but I've never heard of one for the clutch. Thank you.

 

[L.Holman]

View attachment 279063

Learning something new every day but I still haven't seen one on my 2003 DRZ. lol
PS; where does it go?

 

[dirtbkr188]

Part #13194, shown HERE

 

[L.Holman]

Thank you. I just throw that hole part out when I got mine to instaul a cluch kit. Lol