PlanetMinis Forums banner

41 - 43 of 43 Posts

·
Registered
Joined
·
437 Posts
Discussion Starter #41
Finally put in the sikk 107 ES engine after sourcing a new starter for it. And put on a new 22mm carb, Spanglers foot pegs and shift lever.(Store is 30minutes away) Running a 4.5ah agm battery and fmf pitbike exhaust.

fmf is stupid loud. I was hoping to re-use my 70 exhaust to keep it quiet but it will not work with the starter in the way. To quiet down the fmf I repacked it and added a stainless sink strainer screen and some stainless baling wire to create some baffles. Probably cut the noise level down by 20%. And thinking about buying or making something like this to try. https://www.ebay.com/itm/Stainless-Steel-Insert-Baffle-DB-Killer-Silencer-Motorcycle-Exhaust-Muffler-51mm/382291153124


Next on the list is to play with the carb and get her running a little better. Feels like she is only running at 80% power. Wheelies easy enough but takes longer then I would like for it top out.

Sink strainer:

IMG_20190409_145028355.jpg

Still need to put the new plastics on, paint the tank, and wrap the header pipe so the kids don't burn there legs.
IMG_20190409_180913083_PORTRAIT.jpg

Next project
IMG_20190330_165005.jpg
 

·
Registered
Joined
·
437 Posts
Discussion Starter #42
Been playing with the 22mm carb and while she has decent power I am not impressed with the low end grunt. So have a 20mm carb on the way to try next. Got to love you can buy a chinese carb shipped cheaper then you can buy new mikuni jets for! :shocked2:
 

·
Registered
Joined
·
437 Posts
Discussion Starter #43
Piranha 140, Piranha exhaust etc on the way! Cant wait to see the power difference! Going to put the 110 and fmf on a z50 mud build.
 
41 - 43 of 43 Posts
Top