PlanetMinis Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
352 Posts
Discussion Starter · #1 ·
i came across a slightly used tb143 kit w/ racehead (not the v2) and a 28mm tb carb, is that to much carb for that bore kit and does anyone have any suggestions with what jetting to try? thanks for the help I greatly appreciate it.
 

·
Registered
Joined
·
193 Posts
I was recommended to run the 26mm carb with my 143 motor & since putting in a new piston & porting the head it runs GREAT. my engine builder is building a 17? 178 I want to say, KLX and he is using the 28mm on that. Sorry I dont have a definitive answer on if the 28 will work but hey free thread bump...
 

·
Registered
Joined
·
1,851 Posts
CTATV said:
I was recommended to run the 26mm carb with my 143 motor & since putting in a new piston & porting the head it runs GREAT. my engine builder is building a 17? 178 I want to say, KLX and he is using the 28mm on that. Sorry I dont have a definitive answer on if the 28 will work but hey free thread bump...


what do you got for jetting
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top