PlanetMinis Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
423 Posts
i had a set of these wheels still have the front rim couldnt find a bearing with the correct axle size to make it work.



these are some nice rims though! pretty solid





motofox21 carefull drilling out those holes for the second brake disk;)
 

·
Registered
Joined
·
423 Posts
im all ears for those bearings! the bearings i found would need an outer sleeve to fit the rim correctly and im not sure if thats safe lol



as for the forks i know the x18 forks should work they suck in stock form but swheels had modified his and they work good for motard use just an option.



another thing thats nice about these rims is how light they are!
 

·
Registered
Joined
·
423 Posts
its not the forks thats the problem its the bearing options for those rims i believe is 15mm. so the bearing would need the reduction and the bearing suppliers i looked at had the correct 12mm axle size but the outer diameter of that particular bearing is too small to fit the rim.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top