PlanetMinis Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. Chinese/Import Minis - General Discussion
    So I just bought a 184 kit with the v2 roller head because the stock head took a crap on the 160cc cylinder but anyways it’s in a pitsterpro x4 and I can’t get the exhaust to line up. I’ve drilled the holes bigger on the pipe still dosent fit. Has anyone had this problem or can help me before I...
  2. Chinese/Import Minis - General Discussion
    Been thinking about my motor after doing a lot of intake cleaning and port matching intake and spacers to match getting the best flow possible from my motor,hd valve springs too and now that I have all this work and time I think I need a rev limiter cdi box due to my motor revving way too high...
  3. Chinese/Import Minis - General Discussion
    Hello guys,new to this forum.asking about which one is betterer and why? Opinions? Which one is more reliable and has more power? any plus or minus in these engines and which one would get more top end speed? Would put it in CRF110F style frame.
  4. Chinese/Import Minis - General Discussion
    I have a pitster motard with the GPX/YX160 motor. I have bought the repair kit before for the side cover and bearing replacement (comes with the needle bearing). I still have issues with the kickstart gear slipping and I know its that bearing. Is there a solid fix for this issue? Any...
  5. Chinese/Import Minis - General Discussion
    i have an older gen yx150 with the 160 bore kit, has an inner rotar stator, it feels like it has no compression, it doesn't smoke but i can kick it over by hand. ive already had the kickstart shaft replaced along with a few gears and the crank. the bike had lots of power before everything was...
  6. Chinese/Import Minis - General Discussion
    Where can I get an engine 140cc and up shipped to Canada for a decent price
  7. Chinese/Import Minis - General Discussion
    has anyone tried this carb? or recommend it im pretty sure its a knock off
  8. Chinese/Import Minis - General Discussion
    Is this possible for me to do if I remove the oil slinger and will this harm my motor ?
  9. Chinese/Import Minis - General Discussion
    Hi im new to this site, i have a demon x xlr160 with the yx160 engine in. Its had a full bottom end rebuild since i got it 2months ago because the owner before had destroyed the gear box and snapped the drive shaft on the case bearing. Its a 2010 bike so i think its the gen 3 engine but not sure...
  10. Chinese/Import Minis - General Discussion
    Hi, can anyone tell me length beetween of those lines in picture (beetween big black one and small, and big black one and small red) Not really matter if its from honda style or klx-style one. (im not sure is this rigth place for this topic)
1-10 of 10 Results
Top