PlanetMinis Forums banner


  1. SSR 140TR seat options?

    Chinese/Import Minis - General Discussion
    I just bought a 2019 SSR 140TR (TTR 110 style plastics). I love the bike, but I would love it so much more If the seat wasn't hard as a rock. Does anyone know where I could get a softer more comfortable seat for this bike? Or can anyone confirm if a TTR factory seat is better than the Chinese...
  2. what plastics will fit on a 2017 SSR SR150?

    Chinese/Import Minis - General Discussion
    I am wondering what style plastics would fit onto an SSR SR 150 if there is anything besides the OEM ones which are $189. I would rather not spend that since I only paid $300 for this bike which runs great but needs plastics and I just couldn't justify it. Anyone know any ebay kits that will...
  3. New to minis SSr sr160tr

    Chinese/Import Minis - General Discussion
    Hello all I'm sure this isn't a new topic but I have been struggling to find the answers. I have a ssr sr160tr and I'm looking to find out what parts fit it. I think the plastics are yamaha and honda parts fit most of the engine but I dont have confirmation of any of that. So what parts fit this...
  4. Ssr 125cc

    Chinese/Import Minis - General Discussion
    Hi I have a Ssr 125cc Fully Manual bike that i just bought but the guy ruined the plastics. I was wondering, can the Ssr use honda or any other brands plastics or do the OEM plastics only fit it? I'm also wondering whats a good way to get spray paint off of the frame metal? (I'm pretty sure its...
  5. Ssr 125 cc

    Chinese/Import Minis - General Discussion
    Hey everyone! I am new to dirtbike game, I recently have followed my childhood dreams to own one and bout and SSR 125cc to start out on. However, there aren't many how to or videos on maintaining the bike or upgrades. I have found a few but wanted to know more about how to really get into the...
  6. Is this price good? 2007 Pitster Pro x4r 125 GPX with Zokes for $850

    Chinese/Import Minis - General Discussion
    My son saved up his money. I took him to look at some cheap SSR125's, but I definitely saw some cheap stuff. Is $850 too much for this 2007 Pitster Pro x4r? It looks super clean and fires right up. Thanks in advance!
  7. Are there any pit bikes to buy online that aren't Chinese made s**t?

    Roost Area
    Hello fellas. So I started a project bike about 4 years ago. It was a crf50 with aftermarket frame, swingarm, forks, etc. with a 88cc kit. Super fun to ride until it locked down and I never got around to fixing it. I then bought a SSR 160 from Tbolt usa and that thing was a turd. It wouldn't...
  8. SSR160R oil filter help!!!!

    Chinese/Import Minis - General Discussion
    I just purchased a 2011 SSR160R bike and can't seem to find a oil filter online anywhere. Does anyone know what filter it takes and where to get one? It would be a great help. Thanks, Lee
  9. Ssr150tx aftermarket exhaust?

    T-Bolt USA
    Ok so I just purchased a pretty decent ssr150tx for 500 bucks with an oversize mikuni carb and the previous owner claims that is has a 160cc kit installed. anyway, I'm looking into putting an aftermarket exhaust on it but I'm not sure what fits. Some places say it could be a KLX bend with a CRF...
  10. good quality forks for crf50, ssr?

    I have a 2013 ssr 125 that I recently installed a 140cc piranha in. My ssr forks are junk! Iv changed the oil, added more oil and no luck on making them stiffer. I'm debating on some fastace forks but I really don't want to spend 400 bucks. Is there any other brands that are good enough for...
  11. mikuni 22mm. ssr125 no start

    Chinese/Import Minis - General Discussion
    Hey guys having problems with my SSR 125 I just got a new mikuni 22mm and I can't get the bike to start at all. I confirmed spark. And I have fuel in the bowl I'm completely out of ideas. Also there is an extra hose on the side of the carb I was told it is a vent. Where is it supposed to go? And...
  12. 2014 ssr won't start

    Chinese/Import Minis - General Discussion
    How's it going guys I'm new to this site. Anyway I recently purchased a 125 ssr off craigslist it's been running fine for months. I gave it a wash the other day and it ran fine the day after it won't start. I cleaned the carb and replaced the spark plugs I have no clue what it is. When I kick...
  13. SSR - 125SR ---> Which bike next?

    Chinese/Import Minis - General Discussion
    I have owned a SR125 for the past couple years and have enjoyed it. Only have had to replace brake and clutch levers while teaching new riders. I am looking into getting enough SSR bikes so I can ride with all my children at the same time. I would like more power and better suspension but am...
  14. SSR SR125 weird clutch/gear noise?

    Chinese/Import Minis - General Discussion
    Hey everyone, I'm new to the forum and this is my first post! I recently got a new SSR SR125, got it yesterday just finished breaking it in a few hours ago. I'm not experienced with motorcycles at all so shifting gears/clutch is very new to me. When i first started riding it, i made some...
  15. Clearing out some parts (Rear Pirahna shock, MX swingarm, Frame, Plastics, Tank)

    Import/Chinese Parts for Sale
    Only the parts listed are for sale. If it is not listed, it is not for sale. No, I do not have a part that isn't on the list. Now that that is out of the way, I have the following pieces for sale off the mini pictured above. -Two Brothers Billet Foot pegs, Blue & Two Brothers Chrome HD Poot...
  16. TTR 110 Graphics for SSR 140

    Chinese/Import Minis - General Discussion
    Greetings! First post on here. I'm going to pick up a SSR 140TR and was just wondering if graphics for a TTR 110 will fit? I've searched and found nothing. They look identical, but just curious if anyone is certain. Thanks!
  17. 2013 SSR 125-AUTO....not running right

    Chinese/Import Minis - General Discussion
    I am new to the forum and small engines in general so be warned....I just bought this bike and have replaced the spark plug, cleaned the jets on the carburetor, and new that order. It still doesn't want to run properly. It will start right up with out the choke on and run fine...
  18. SSR 125- How to quiet it down/Too loud?

    Chinese/Import Minis - General Discussion
    Hey everyone, I'm interested in buying an ssr 125 just to play around on and ride some small trails. I heard that they are VERY loud for a stock muffler, and since I'll be riding down my neighborhood sometimes to get to trails I would like to quiet it down. I was thinking of putting a stock...
  19. SSR 125TR street legal Motard

    Hey guys, Im new into the whole pit bike thing but I saw one cruising around my neighborhood and now I have to have one :D I was wondering if anyone had any ideas on setting up a SSR-125TR to be street legal? Ive tried searching but all I'm seeing is the pitsters that they dont seem to make...
  20. To buy or not to buy: SSR 125 TR with 10-15 hours on it

    Chinese/Import Minis - General Discussion
    I'll be meeting someone in a couple hours to take a look at his SSR 125 TR, he says it was bought a few months ago and only has 10-15 hours on it. After checking out the guide posted here about what to do when you first buy a bike such as changing the oil, breaking in the engine, putting Loctite...