PlanetMinis Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 19 Results
  1. Chinese/Import Minis - General Discussion
    Need the community’s help. I’ve been working on two 2016ish SSR 125 engines, the first one I bought a full gasket kit for it off of Amazon (some brand that someone had claimed fit their SSR). When I was reassembling the engine, less than half the gaskets fit at all and the others needed some...
  2. Roost Area
    So everyone has their own preference on what fuel they run octane, brand, etc. I have always been firm on running premium fuel for my 2021 SSR125 as I have noticed with 87 octane it just doesn't run as crisp. I decided to try a new combo out of pure curiosity so I bought myself some VP Racing...
  3. Chinese/Import Minis - General Discussion
    So just thought I would share since I see so many questions out there regarding folks wanting to add a cdi box with a rev limiter to their ssr125 and with the limited availability and info for that specific option I finally nailed it. For my 2021 ssr 125 Tbolt has the TRC EZ Start High...
  4. Chinese/Import Minis - General Discussion
    Hi, I have an appollo db125 that's had an ssr sr125 swap, i bought the engine used and put a new piston and rings in it, after putting it back together and starting it, it makes a really audible ticking noise coming from the head, is it possibly valve lash? Here's a video link for the sound Ssr...
  5. Chinese/Import Minis - General Discussion
    I understand that crf50 levers and body fit the ssr 125. Is this also true for engine parts? I need a shifter rod and the clutch socket that fits the ssr 125. Thanks in advance
  6. Chinese/Import Minis - General Discussion
    So I got a sr125tr frame with the forks and rim bought a 12 in piranha back rims 12mm by 200mm back axle and it’s to short anyone know where I can get the right one or have a aftermarket swingarm that would fit they would sell??
  7. Chinese/Import Minis - General Discussion
    If you put the right socket on the flywheel bolt could you spin it to start the engine? Could you damage anything? Could something come loose? Which direction would you spin it?? Thanks for the help!!
  8. Chinese/Import Minis - General Discussion
    Hello everyone on my SSR 125 the crank case vent goes into the air filter. I’m replacing my carburetor and air filter and was wondering what should I do with the vent line. Should I route it into the new air filter or leave it off to the side? Are there any potential consequences of not routing...
  9. Chinese/Import Minis - General Discussion
    Hi guys, I recently picked up 2 pit bikes, 1 being an automatic SSR 125. It didn't start when I got it so I did the normal things like clean out the carb and put new gas in. I then got a new spark plug and installed that and now the bike will turn over but not start. It has compression and a...
  10. Chinese/Import Minis - General Discussion
    Hey Guys im new to the Pitbike scene. Just rencently my son and I went to our local SSR dealer and i like the feel of the sr125and my son is 8yrs old and5 foot1 loves the sr110. but for my sake how is the Sr125 or is it worh going to the too sr140 or sr160 any Advice???
  11. Chinese/Import Minis - General Discussion
    Hey everyone, I'm looking to upgrade the suspension on my SSR 125. The stock suspension is too soft and riding on trails is a little rough. I had a few questions about what parts to buy. I weigh about 150lb for reference. For the forks I want to buy these springs from TB and use heavier fork...
  12. Chinese/Import Minis - General Discussion
    Haven't been riding in 2 months sadly due to my ssr 125. I washed it one day then the next it won't start and it still won't i replaced the spark plug still nothing. What can I do should i rewire the whole thing with a kit off of t-bolt or could it be the startor or is it the CDI? I'm so...
  13. Chinese/Import Minis - General Discussion
    i have a all stock ssr 125 i wanted to change the gearing a little so i can go faster, and cruise at a higher speed, what some good cheap performance mods for my ssr 125. thnx and before someone says get rid of your crappy Chinese bike and get something Japanese you can frig off lol.
  14. Chinese/Import Minis - General Discussion
    How's it going guys I'm new to this site. Anyway I recently purchased a 125 ssr off craigslist it's been running fine for months. I gave it a wash the other day and it ran fine the day after it won't start. I cleaned the carb and replaced the spark plugs I have no clue what it is. When I kick...
  15. Chinese/Import Minis - General Discussion
    Hey everyone, I'm new to the forum and this is my first post! I recently got a new SSR SR125, got it yesterday just finished breaking it in a few hours ago. I'm not experienced with motorcycles at all so shifting gears/clutch is very new to me. When i first started riding it, i made some...
  16. Import/Chinese Parts for Sale
    I found an SSR 125cc pitbike for sale in great condition. Only problem is third gear doesnt work in the engine you have to skip from 2nd to 4th. If like to pull the engine out and sell it and upgrade but before I buy the bike I'd like to know what I could get for the engine the way it is. Could...
  17. Chinese/Import Minis - General Discussion
    Yesterday while riding my ssr 125 the suspension came apart. i haven't had the chance yet to try to fix it but before i do i wanna get some support from you guys as yall are experts on this stuff. so the bolt came out of its bottom holding and the spring coil almost slid off. this cause the...
  18. Chinese/Import Minis - General Discussion
    Hey everyone, I'm interested in buying an ssr 125 just to play around on and ride some small trails. I heard that they are VERY loud for a stock muffler, and since I'll be riding down my neighborhood sometimes to get to trails I would like to quiet it down. I was thinking of putting a stock...
1-18 of 19 Results
Top