PlanetMinis Forums banner
1-19 of 76 Results
  1. CRF50/CRF70 Parts For Sale
    Red Baron swing arm good condition Comes with chain. I got the chain , & chain tensioner that go with this just not in the photo. little chain wear from cracked chain slide. menifee ca 200$ + shipping 9515667944
  2. Honda CRF70
    Xr70 with a piranha 125, dnm 350 lbs rear shock, pro taper bars, 50 caliber racing tall seat and crf70 tank, billetware peg mount and super wide pegs, fmf pipe. Full crf plastics and seat, custom subframe to bolt on crf stuff. Bbr springs in the forks.
  3. Chinese/Import Minis - General Discussion
    Hello I I’m kind new to this so sorry if u post on a wrong tab but I was wondering if Thumpstar is a good pitbike to buy for a long time use ?
  4. Chinese/Import Minis - General Discussion
    I am looking for some advice I am new to owning a pitbike and I have slight oil leak come out of the nut in picture 1 anyone no why I no they have got a seal in them but not sure what they are called to get a new one also what gose in the nut in picture 2 and in picture 3 what's the nut call...
  5. Chinese/Import Minis - General Discussion
    Does somebody know how I can find out what my pitsterpro bike model is, or if you guys could tell me what model it is?
  6. Roost Area
    A funny little video my 11 year old son helped me with when our local SXCS series announced they were having Saturday night pit bike racing!
  7. Chinese/Import Minis - General Discussion
    I currently bought a pitster pro. The guy says it’s the 190 in it. I cannot find neutral but it will seem like it’s in neutral between almost every gear at random moments. Like between 3rd and 4th and so on. I cannot figure out the issue does anyone have ideas? Also clutch will not engage to...
  8. Honda CRF110
    Hi all! I’ve been in the 50 game for around 15+ years and never got huge into it, but did the simple mods like 88 kit, skid plate, pipe, +2 swinger and some bigger suspension. But seeing everyone with a 110 seems to be (or has been) the new craze. My 50 has been siting for the last 5-8 years...
  9. Yamaha TTR50
    I everyone I have a 2015 Yamaha ttr50 that’s not getting spark and I have no clue what to do I put a new cdi on it still no spark and a new startor still no spark and I’m stuck I have tried putting on a new kill switch on nothing new plug nothing new coil nothing still if anyone knows anything...
  10. Chinese/Import Minis - General Discussion
    Hey guys, so I'm super new to pit bikes, need some couple questions answered if possible First off, I can't get the thing to idle right any more even with adjusting the screws, won't idle steady, Secondly I bogs down with anymore then half throttle, so what size carb is best for mine? And...
  11. Honda CRF110
    Hi all, One for any Crf 110 Enthusiasts, I’ve had an issue for a while with my 110 struggling to select 1st gear. I’ve had it apart once and changed the small spring on the gear linkage but unfortunately that hasn’t cured it. It goes up and down the gears fine once it manages to select first...
  12. Chinese/Import Minis - General Discussion
    Hi I have a stock zongshen 155 that I am trying to tune a pwk 28 for. I was using a genuine mikuni vm 26 carb I’d bought off tbolt USA but the throttle response left something to be desired, so I thought I’d try a flat slide since this carb was given to me for free. Pretty sure the carb came off...
  13. Honda CRF110
    Just picked up a 2020 CRF110! Thing is a beast! Got a Pro Circuit T6 and it is seriously a different bike. So much more power it is insane. Plus there is a code "VROMDANA" you can use on there website that saves you like $75 off a 110 pipe.
  14. Complete Bikes For Sale - All makes and models
  15. KLX110, DRZ110, TTR90
    Hi guys, I got the TBolt big bore kit for my drz110. I have a decent bog from idle and was curious if that means its too rich or lean for pitbikes? I know how to jet big bikes 4 stroke and 2 stroke but not too familiar when it comes to smaller 4 strokes. Any else have this kit and what jetting...
  16. KLX110, DRZ110, TTR90
    I have a 2007 KLX 110 10 year old stock swingarm. I purchased a new 270mm piranah shock for it and wanted to change out the swingarm bearings, well that didn't go as planned. Now I have to look for a new swingarm. The OEM swingarms are very expensive, so I was looking for aftermarket swingarms...
  17. Yamaha TTR50
    I keep destroying my spokes on my ttr50 and I have been looking for heavy duty wheels, but i cant find any. I read that people just get heavy duty wheels for crf50s and switch the hubs, but crfs have 28 spokes and ttrs have 30. Does anyone know if it would still work or maybe some other option...
  18. CRF50/CRF70 Parts For Sale
    Hello, I am selling one of my handmade crf50 full and real carbon bodywork for crf50 or other pitbikes with crf50 mount. Made of real aircraft carbon. shipping is with insurance and tracking number from AUSTRIA (EUROPE) 290usd for bodywork + shipping ( shipping depends where you at) just contact me
  19. Z50, CT70, ZB50 and other Honda Parts
    looked everywhere but everything I am finding is for a 4 bolt rim. My current hub's sprocket studs are stripped and after a failed attempt at fixing them i believe i am in need of a new hub. any suggestions where i should look?
1-19 of 76 Results