klx110

Hi guys I have a klx 110 2017 model and I cut a hole in the air box the same size as the hole in the frame but now I can’t get it to run right. I’ve put a size 80 jet int it and I’ve also shimed the needle to. Anyone have any suggestions on anything else I could try?

just picked up a pitster pro xjr110. Wanted to get some suggestions for what to upgrade. Also wanted to see if anyone knows what parts fit. It has 26mm carb, Planning to get a bigger jet. Was thinking about a bigger rear sprocket, it’s already 39 teeth. Also some stiffer springs in the forks...

Selling brand new, never used rare discontinued FMF Factory 4.1 Mini for KLX 110. Fits all KLX 110 models from 2003 onwards. If you found this listing, you know what you were looking for, this is the famous FMF "fatty" exhaust pipe. Asking price: 300 USD Shipping from Finland (Europe), please...

Howdy. Hopefully I've come to the right place with all these questions of mine. I am currently building a 1995 Z50R with a KLX110 fork upgrade, +3" swingarm extension, and (possibly) a 140cc Piranha engine. At this point, I am starting to think about brakes. With a 140cc engine, I feel like...

Hey, I’ve recently put the tusk cold jet kit in my 110 To see if it would give any more performance along with my exhaust and it seems too rich. the only mods I’m running performance wise is a pro circuit t6. Do y’all have any recommendations on what jets to run, im contemplating doing the BBR...

Looking for jti corso plate for klx110. Prefer the one you can change your oil without removing but willing to look at the older version. Thanks

Hi, I recently broke the foot peg mounts on the cases of my 110. If anyone is selling cases or motors, blown or not lmk. Thanks

My efi build.

Hey guy im searching for klx110L suspension parts i would even take a whole frame if the price is right. Please let me know what you all have. If you have any other swingarms or front ends for a decent deal let me know.i live in durham nc but will pay for shipping if need be. Either hmu on here...

ISO klx110 mod motor 2010+

Everything goes together right and fits good did have problems with my case going on so I cut the hook thing off and kept it there as a spacer on the splined part, but when I tighten everything down my shifter is hard to move. Also cant get it out of gear no ideas what that could be (also just...

Trying to remove my gear to flip it over for my oil pump that's on my crankshaft. How do I do it please and thanks Do I have to split the case?

After putting 4th gear in my oil pump dont seem to mesh right to the camshaft anyone ever had this problem? And what was wrong. 98% sure I did everything correct when the case was open.. after tightening the primary to 53 ft/lbs it got worse. Please and thanks for the help looking to get my...

I just installed the BBR U flow with a 100 main jet (BBR recommends running 95-100). when getting on it, it almost feels like its not letting it getting all there power out of it like it did when it was bone stock... stock pulled way harder. I'm wondering if I try and drop the main jet to a 98...

Hi all, I am 32 years old and I am passionate about pit biking. I am seduced by the KLX110L because it is little higher than the KLX110. But unfortunately I live in France and the KLX110L is not sold. I started to look at the differences between the KLX110L and the KLX110. I compared the...

SOLD KLX110L Monster Mod, 143cc, Incredible Bike, Very Strong, Runs Great, asking $3,200 2012 KLX110L completely modified to 143cc with V2 race head Marzocchi Inverted Front Suspension, reworked by Feal Suspension, nitride coated stanchions Sik 110s extended rear swingarm w/ Pirhanna DNM...

Hi guys, I got the TBolt big bore kit for my drz110. I have a decent bog from idle and was curious if that means its too rich or lean for pitbikes? I know how to jet big bikes 4 stroke and 2 stroke but not too familiar when it comes to smaller 4 strokes. Any else have this kit and what jetting...

whats up guys new here on the forum and new to the minimoto world. Spent the last few years on 250s and ltr450 but been wanting a pitbike for a while and after always riding my buddies i decided to buy a brand new klx110l. So far i Love it! ive put on the bbr u-flow, pro circuit t-4, and pro...

hey guys im new to the forum and the minimoto world so spare me if i sound dumb. I got a new klx110l and want to put new levers, brake pedal, and footpegs on but i cant seem to find any anywhere without spending an arm and a leg. I'm trying to stick with green and black colors but all i can...

I bought a KLX 110 with a messed up rear wheel, I bought new bearings and seal. I think I may be missing a spacer or something because the tire wont rotate when tight. Does anyone have pics of their rear wheel taken apart so I can see how it should be put together and possibly any spacer I may...