PlanetMinis Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 70 Results
  1. KLX110, DRZ110, TTR90
    Hello alll, looking for some input about my klx 110. Currently is has a143 tb kit on it and im looking to upgrade from the stock head. Are there any different heads that will bolt straight on from other motors like the zongshen or the yx 150 or 160s? Or is the tb v2 race head my only option?
  2. Bikes and Parts Wanted - All Makes
    Looking for a hydraulic clutch setup for my klx110 if anyone knows we're I can find one let me know bbr does not sell it anymore Let me know
  3. KLX110, DRZ110, TTR90
    I picked up a 2013 klx 110 for cheap. My daughter is a little too tall for it. What is needed to convert it to a 110L or are there other ways of making it taller? Thanks
  4. KLX110, DRZ110, TTR90
    08 Klx built to a 194cc. I broke the output shaft split the cases got it all back together bike ran great then woodruff key fell out It was stuck to the inside of the flywheel. Pulled it all back apart torqued flywheel to spec. & Put it at tdc on flywheel and cam sprocket checked the valves...
  5. KLX110, DRZ110, TTR90
    So I want to do this… I know for sure I will put some bbr damping rods on the top end, but now I’m curious about the shock, can I just buy a new BBR spring and put it on my Stock klx110 shock? Or do I need a whole new shock. Here’s what I think I need for this all to work, but I just need to...
  6. KLX110, DRZ110, TTR90
    Hi, I am looking at buying the Wiseco piston kit 0.20 oversize. Will this require the cylinder to be bored or honed? I haven’t torn into the top end yet but assume it is running the stock piston. Will that kit work. Thanks.
  7. KLX110, DRZ110, TTR90
    I have a v2 head with a tbolt PE28 mm carb an it hits the frame of my klx110 and valve cover on the head causing it to sit sideways alittle. Manifold that came with it. So im not sure why it dont fit. Any help would be greatly appreciated
  8. KLX110, DRZ110, TTR90
    I have a 2021 KLX 110, bike doesn’t even have an hour on it. When I brought it home I noticed if you go to wide open throttle from an idle it kills the engine immediately. I have set the air screw to 1.5 turns out and rejetted it to 92m 38p. Does anyone know of this being an issue or know any...
  9. KLX110, DRZ110, TTR90
    I cannot find a jetting chart anywhere that takes elevation into account. Curious if anyone knows of one or can help me out. I have a 2021 KLX 110R with Pro Circuit exhaust and pancake style intake. I live at an elevation of about 6,300. Let me know what you got, thanks.
  10. KLX110, DRZ110, TTR90
    Hey Everyone, looking for some opinions/options for upgrades! I have an 05 i just picked up during the off months of Covid. Thing smoked like a duramax, so i put the TB 143 kit in it. Runs great right now after messing with the jets,and im playing around with the gearing right now. I just...
  11. KLX110, DRZ110, TTR90
    just bought a 2005 sx 65 front to put on my klx 110 and wanted to know how to set it up for a 70kg rider. links for any parts would be good thanks
  12. Bikes and Parts Wanted - All Makes
    Looking to go back to stock exhaust. Would like to trade my two brothers pipe for one ideally but can pay if needed. Prefer local to Menifee, CA shoot me a text if you still have one laying around. 951-750-9384
  13. Bikes and Parts Wanted - All Makes
    picked up a 08 klx110 the other day, tidy little bike mechanically but needs some help on the visual side of life, where can I get some graphics for my little beast, looking at going a black and white colour scheme and they HAVE TO ship to Australia, any help or links would be greatly...
  14. KLX110, DRZ110, TTR90
    My dad and I ordered a 143cc big bore kit and we installed it and it started for about 5 seconds and shut off and it also made an air sucking noise from the carburator. Is the air noise normal? And what could be the issue if it isn't starting? The starter sounds like it isn't have a good time...
  15. KLX110, DRZ110, TTR90
    Hello, I just picked up a 2020 KLX 110L and would like to raise the stock bars up a little bit. I dont want to redo the whole handlebar setup. I found Tusk brand bar risers that lift the bars 15mm or 30mm. My main concern is will all the stock cables still reach far enough after the bars are...
  16. Bikes and Parts Wanted - All Makes
    Not long had my klx now and want to get some bits for it, just wondering if anyone has got any recommendations before I order some parts. I live in London and can’t find anywhere in there uk for parts hence why I’m asking. I need a cradle mount, footpeg mount, I have been looking at the two...
  17. KLX110, DRZ110, TTR90
    Hi guys, I have a 2006 klx 110, I have just put a 143cc kit in it, the kick start was slipping so I replaced the one way bearing. I have installed a new clutch and springs. But as soon as I kick it now I have next to no resistance. If I have the clutch cover loose and not fully done up it kicks...
  18. KLX110, DRZ110, TTR90
    Hi all, I am 32 years old and I am passionate about pit biking. I am seduced by the KLX110L because it is little higher than the KLX110. But unfortunately I live in France and the KLX110L is not sold. I started to look at the differences between the KLX110L and the KLX110. I compared the...
  19. Bikes and Parts Wanted - All Makes
    hi i'm looking for a 110 2010+ and up. let me know if you have any or if you have any ideas! 4355530379
  20. KLX110, DRZ110, TTR90
    I just started building my 110 and I’ve seen all the posts about the “klxster” builds but Not many recent builds. Was wondering if anyone has built one recently or if anyone could give me some information on previous builds. Also does anyone have the dimensions for the upper shock mount...
1-20 of 70 Results